欢迎光临佛山市柏丰光电科技有限公司官方网站!

news

product

contact

Manager Yao:18620162177

Manager Kong:13148908757

Tel: 0757-81795612

Address: Baifeng Photoelectricity, Xizi Industrial Road, Hecun, Lishui Town, Nanhai District, Foshan City, Guangdong Province

Website: en.bflightled.com

What are the key technologies of energy-saving LED industrial and mining lamp lighting design?

Your present position: Home >> News >> technical knowledge

What are the key technologies of energy-saving LED industrial and mining lamp lighting design?

Date of release:2019-04-02 Author:柏丰光电 Click:

At present, with the development of society, the demand for energy-saving and emission-reducing green lighting is becoming more and more intense. The main products of green lighting are LED energy-saving lamps, energy-saving LED industrial and mining lamps and other products. But at present, the quality of LED products in China is uneven. One of the most important reasons is that the quality of thermal conductive glue is not good, and the heat dissipation of heat sink plate is not enough, which leads to the low quality of lamps and lanterns. The choice of thermal conductive glue should pay attention to: sticky thermal conductive glue should be selected, this glue can improve the thermal conductivity of energy-saving industrial and mining lamps, improve the service life of lamps; there will be many choices in the selection of diffuser board, each with its own advantages and disadvantages, most of the production of flat lamps will choose diffuser board with smooth surface and fog surface, but the process of using this kind of lamp board is appropriate. There will be a lot of static electricity in the lamp, which will absorb the dust in the air to the lamp shade or the lamp body at the same time of lighting, affecting the uniformity of light.


LED工矿灯

    

Energy-saving industrial and mining lamps belong to the installation of new scientific and technological products. Installers must be licensed professional electricians. Only in this way can we avoid the failure of installation and damage to energy-saving industrial and mining lamps. The following is the installation notes summarized by Hupu: First, check the integrity of energy-saving industrial and mining lamps and complete accessories. Connections on lamps and lanterns can be made through drilling holes and can be fixed with wire clamps at the back of lamps and lanterns to ensure that they are firmly fixed. Make sure that the power cord of the lamp is long enough and not subject to tension or tangential force.  When installing the connection of lamps and lanterns, avoid excessive tension and do not tie the connection. Output wiring should be distinguished and not confused with other lamps.


Products and flammable materials should be at least 0.2m away, to ensure that the installed ceiling has a gap of 2cm high, lamps can not be all installed in the ceiling, or the wall with heat source, attention should be paid to low-voltage and high-voltage wiring separately. In the energy consumption of factories, lighting energy consumption occupies a certain proportion. For example, in a 40,000 square meters factory building, the lighting load is about 400 KW. Therefore, how to achieve energy saving and environmental protection is an important issue for factory designers in the selection of lighting fixtures. In addition to energy saving and environmental protection, the lighting lamps based on the new LED light source have the advantages of long life, fast response time and concentrated light. In recent years, they have been widely favored by consumers.


Key technologies of lighting design for energy-saving industrial and mining lamps; new technologies, new materials and new technologies are constantly applied to the design of high-power LED light source, which lays a solid foundation for the design of high-power energy-saving industrial and mining lamps. Because the application products of the same LED light source are quite different, the introduction of design and test standards lags behind, which leads to poor interchangeability in structure and performance of products produced by different manufacturers. At the same time, energy-saving industrial and mining lamps and lanterns are an integration of machine, light, electricity and other factors, and their design involves many fields of technology.


The address of this article:http://en.bflightled.com/news/385.html

Key word:LED工矿灯,节能LED工矿灯,LED工矿灯价格

Recently browse:

HOME              PRODUCT

ABOUT             CASE

HONOR            NEWS 

MESSAGE         CONTACT

Foshan Baifeng Photoelectric Technology Co., Ltd.

Manager Yao: 18620162177

Manager Kong: 13148908757

Telephone: 86+0757-8179-5612

Website:en.bflightled.com

Address: Baifeng Photoelectricity, Xizi Industrial Road, Hecun, Lishui Town, Nanhai District, Foshan City, Guangdong Province

  • Service
  • number
    13148908757
  • Message
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    name
    Contacts
    Telephone
    Telephone
    mailbox
    mailbox
    address
    address